Call: 702-358-3350 PST in USA & CANADA

E-mail: sales@indiantandoors.com

 

Technical Specifications of Steel / Gas Tandoor

1. CONSTRUCTION :
Inside the Stainless Steel cover, a strong St. Steel / MS Iron angle frame (Iron Oxide &
Enamel painted) is built to support the Clay Oven / Pot (Clay Tandoor). The Base is made with
10 gauge MS Sheet & with Fire Bricks over it.

2. EXTERIORS :
Top of the Tandoor is built with 16/18 gauge Stainless Steel & a water container is provided
for the convenience of the operator. (Optional)

3. THE SIDES :
They are built with 18/20 gauge stainless steel sheet, well polished & ventilation is provided for
escape of hot air. (This may differ for Different modals with different Material like Aluminum /
Galvanized Iron Sheet or Stainless Steel Sheet).

4. INSULATION :
As per requirement depending upon the size of the Clay Tandoor / Oven; 6" thick at base & at
the top and 4" at the center has been provided to ensure that there is minimum Heat Loss from
the sides of the Tandoor which makes it more Fuel Efficient.

Note : WE DONT USE GLASS WOOL OR ASH AS INSULATION.
The GLASS WOOL being an inferior & carcinogenic (cancer causing) agent & poses a Health
Hazard both to the manufacturer & potential hazard to the end user. We use only the best
quality industrial insulation.

5. WHEELS: (Optional in Domestic Modals)
Size 4" Castor wheels for easy & smooth mobility of which 2 are with locking facility.

6. HANDLE : (Optional in Domestic Modals)
A Steel E.R.W. handle to control the direction of the Tandoor.

7. BURNER : (Optional- Only in Gas Tandoor)
Type T-45 / T-60 / T-70 / Round / Pipe with free flow Jet (only where Gas supply is from
pipeline & with low pressure) (May differ with the Difference in various modals). Approved by
the Bureau of Indian Standards as most Fuel Efficient Burner. (BIS standards are based on ISO 9000 standards)

8. NEEDLE CONTROL VALVE: (Optional - Only in Gas Tandoor)
Easy to use Best Quality Brass Needle Control Valves are provided at a convenient position
to Increase or Decrease the Flame of the Burner. Approved by the Bureau of Indian Standards.

9. STAINLESS STEEL LID: (Optional in Domestic Modals)
A Steel Lid with insulation is provided to control the heat loss from the top of the Tandoor.

10. WATER CONTAINER: (Optional)
A Stainless Steel water container is provided for the easy cooking of Indian Breads, Nan,
Parantha's etc.


# We dont Use Glass Wool & Ash as Insulation
***** CAUTION *****
Using your Clay Tandoor without outer Body & Insulation (as it is) with Gas or Charcoal can cause serious injury. It can break or crack when exposed to extreme temperatures.
It needs proper installation with heat insulation and with a brick & mortar wall or metal drum or any other outer casing you may want to use.

USA CONTACT : MONY MARWAH Cell : 702-358-3350 ; Res : 702-642-1531
E-mail: sales@indiantandoors.com
Marwah Tools
Off:- C1-A / 29-B, Janak Puri, New Delhi. Pin:- 110058. INDIA.
Tel:- 0091-11-25590231.
Fax:- 0091-11-25590231.
© 2000 - 2009. All rights reserved.
No part from this site can be re-produced in print or electronic format whether in part or whole, without prior written consent of the Authors M/s. Marwah Tools.